You are here: Home > Products > SMAPI


    SMAPI pumps are three screw pumps API676 (3rd edition) compliant.

    Models Modelli 20 - 25 - 32 - 40 - 45 - 55 - 60 - 70 - 80 - 90 - 110 - 125 - 150 - 180
    Installation Installazioni Vertical, horizontal Verticale, orizzontale
    Connections Connessioni SAE, DIN, ANSI
    Drive loading Carichi No axial or radial loads Nessun carico assiale o trasversale
    Shaft rotation Rotazione albero Clockwise (from shaft end) , (suitable also for counter clockwise rotation, please contact Settima) Destra (disponibile anche per rotazione sinistra, contattare Settima)
    Shaft speed Velocità di rotazione From 300 to 3.600 rpm* Da 300 a 3.600 rpm*
    Flows Portate From 4 up to 1.800 L/min (at 2.950 rpm) -From 1.800 to 3.200 L/min pump must be over-busted, contact Settima Da 4 a 1.800 L/min (a 2.950 rpm) - Da 1.800 a 3.200 L/min la pompa deve essere sovralimentata in aspirazione
    Outlet pressure Pressione di mandata 60 bar continuous – 80 bar intermittent 60 bar continuo – 80 bar ad intermittenza
    Inlet pressure Pressione di aspirazione Min. -0.7 bar max 9 bar ** (with mechanical seal) Min. -0.7 bar max 9 bar ** (con tenuta meccanica)
    Fluids Fluidi - Mineral oil HLP e HVLP - Ecologic fluids HETG, HEPG, HEE - Synthetic fluid or emulsion: HFA oil-water emulsion, HFB water-oil emulsion 40% of volume, HFC water/glycole – water max 35 to 55%, HFDR phosphate ester - Lubrication high viscosity oils *** - Special synthetic fluid: MIL-H, SKYDROL **** - Fuel oil: MGO, MDO, Low sulfur MDO and HFO - DMX (ISO8217), DMA, DMB, DMC, DMZ - MAZUT, bunker oil, furnace oil, engines oil, heating oil, hydraulics oils DIN 51524 - Naphta, petrol - Oli minerali HLP e HVLP - Fluidi ecologici HETG, HEPG, HEE - Fluidi sintetici o emulsioni: HFA emulsione olio-acqua, HFB emulsione acqua-olio 40% dl volume, HFC acquar/glycole – acqua max 35 to 55%, HFDR phosphate ester - Olio ad alta viscosità per lubrificazione *** - Fluidi speciali sintetici: MIL-H, SKYDROL **** - Fuel oil: MGO, MDO, Basso livello di zolfo MDO and HFO - DMX (ISO8217), DMA, DMB, DMC, DMZ - MAZUT, bunker oil, furnace oil, olio per motori, heating oil, olio idraulico DIN 51524 - Naphta, benzina
    Viscosity Viscosità From 2 up to 10.000 cSt Da 2 fino a 10.000 cSt
    API Seals Guarnizioni standard API Mechanical seal: non-API, API 682, single and double. Mechanical seal flushing system (optional) according to API PLAN 53B. Magnetic coupling available. Seal polymer materials: NBR, FKM, FPM, EPDM ***** Tenuta meccanica: non API, API 682, singola e doppia. Sistema di flussaggio della tenuta meccanica (opzionale): a norme API PLAN 53B. Giunti magnetici disponibili. Polimeri delle tenute: NBR, FKM, FPM, EPDM *****
    Acoustic emissions Emissioni acustiche From 52 up to 68 db(A) at 2.950 rpm Da 52 fino a 68 db(A) at 2.950 rpm
    External case Corpo esterno ASME carbon steel, inox Acciaio ASME, inox
    Cartridge Cartuccia interna Aluminum, cast iron, steel Alluminio, ghisa, acciaio
    Screws Viti Steel for main screw , idler cast iron Acciaio vite principale, ghisa viti secondarie
    Enviroment temperature Temperatura ambiente From -20° up to +60°C Da -20°a +60°C
    Hydraulic Temperature Temperature Olio From -20°C up to +180°C Da -20°C a +180°C
    * Please, see GR125, 150, 180 SMT16B&SMAPI series catalogue.
    Vedere il catalogo GR125, 150, 180 SMT16B&SMAPI.
    ** For higher pressure please contact Settima.
    Per pressioni maggiori contattare Settima.
    *** For high viscosity applications and/or oil-air emulsions, please contact Settima.
    Per applicazioni ad alta pressioni e/o emulsioni olio-aria contattare Settima.
    **** Special synthetic fluids on request.
    Altri fluidi sintetici a richiesta.
    ***** For special seals contact Settima.
    Per tenute speciali contattare Settima.
  • Applications


    Oil & Gas


    Power Generation



    No Noise

    High Flow

    High Viscosity

    Low Viscosity

    Fuel Oils


    no content available
    Please insert your email address to download pdf.

The materials on this website are, in whole or in part, protected and are proprietary of Settima Meccanica S.r.l. based in via E. Berlinguer 20, 29020 Settima (PC) including, as non-exhaustive examples, the brand names, trademarks, domain names, designs and patterns, patents and copyrights,. All rights therein are internationally reserved.

All brand names, trade names, logos, designs and other distinctive marks reproduced in this website, even if not registered, are trademarks of Settima Meccanica S.r.l. All domain names used in this website and / or in the websites connected to this one, belong to, or are authorized by, Settima Meccanica, which owns their whole management at international level.