You are here: Home > Products > SMT
  • SMT


    SMT SMT 3d
    SMT pumps are three screw pumps for industrial use at low and medium pressure (80 bar). SMT pumps represent a reliable and low noise component for many industrial applications where long life and low cost are required. SMT pump is a priming pump assembled into a body pump. The three screws rotate inside the body pump and the design of the screws avoids any axial load. The functional pressure develops some tolerance between the balancing piston of the main screw and the surrounding body. This creates a balancing hydrodynamic force of the screws and, at the same time, lubricates and cools down the sealing parts. The torque needed to move the lateral screws is transmitted hydraulically by the pumped fluid. This means that the screws rotate with no possibility of wearing.

    The high quality of screw manufacturing ensures a very low level of acoustic emissions and pulsation.

    The geometric design of the three screws creates sealing chambers. During the rotation of the screws, the main one creates a sort of cavity that holds the fluid and drives it with an axial direction from the inlet to the outlet port. SMT pumps may have internal or external relief security valves.

    Types Tipi Dry (SMT) or submerged (SMIT) Esterno (SMT) o sommerso (SMIT)
    Models Modelli 20 – 25 – 32 – 40 – 45 – 55 – 60 – 70 – 80 - 90
    Installation Installazione Free for SMT. Submerged (totally or partially) for SMIT Qualsiasi per SMT. Sommersa (parzialmente o completamente) per SMIT
    Flanges Flange ISO 3019/2
    Connections Connessioni SAE 3000 - BSPP
    Drive loading Carichi No axial or radial loads Nessun carico assiale o trasversale
    Shaft rotation Rotazione albero Clockwise (from shaft end) , (suitable also for counter clockwise rotation) Destra (disponibile anche per rotazione sinistra)
    Shaft speed Velocità di rotazione From 500 to 3.600 rpm(1) Da 500 a 3.600 rpm(1)
    Flows Portate From 4 up to 1.220 L/min Da 4 a 1.220 L/min
    Outlet Pressure Pressione di mandata Up to 80 bar Fino a 80 bar
    Inlet Pressure Pressione in aspirazione Min. -0.7 bar max. 3 bar(2) Min. -0.7 bar max. 3 bar(2)
    Fluids(3) Fluidi(3) • • • • • • • • Mineral oil HLP e HVLP Ecologic fluids HETG, HEPG, HEE Synthetic fluid or emulsion: HFA oil-water emulsion, HFB water-oil emulsion 40% of volume, HFC water/ glycole – water max 35 to 55%, HFDR phosphate ester Lubrication high viscosity oils Special synthetic fluid: MIL-H, SKYDROL, Fuel oil: MGO, MDO, Low sulfur MDO and HFO DMX (ISO8217), DMA, DMB, DMC, DMZ Bunker oil, furnace oil, engines oil, heating oil, hydraulics oils DIN 51524 • Oli minerali HLP e HVLP • Fluidi ecologici HETG, HEPG, HEE • Fluidi sintetici o emulsioni: HFA emulsione olio-acqua, HFB emulsione acqua-olio 40% dl volume, HFC acqua/glicole – acqua max 35 to 55%, HFDR phosphate ester • Olio ad alta viscosità per lubrificazione • Fluidi speciali sintetici: MIL-H, SKYDROL, • Fuel oil: MGO, MDO, Basso livello di zolfo MDO e HFO • DMX (ISO8217), DMA, DMB, DMC, DMZ • Bunker oil, furnace oil, olio per motori, heating oil, olio idraulico DIN 51524
    Viscosity Viscosità From 2 up to 10.000 cSt(4) Da 2 fino a 10.000 cSt(4)
    Seals polymer (shaft, O-ring) Polimero guarnizioni (albero, anello di tenuta) NBR, FKM, EPDM (5)
    Seal type Tipo di tenuta TM, TMK, TMZ, FGM
    Acoustic Emissions Emissioni Acustiche From 52 up to 68 db(A) at 2.950 rpm (value based on ISO 4412 test procedure) Da 52 fino a 68 db(A) a 2.950 rpm (ISO 4412 test)
    Pump body Corpo pompa Extruded aluminum alloy Alluminio estruso
    Pump body (special applications) Corpo pompa (applicazioni speciali) Cast iron, steel. Hardened steel and stainless steel available on request. Ghisa, acciaio. Acciaio temprato e acciaio inox su richiesta.
    Screws Viti Steel for main screw , idler cast iron Acciaio vite principale, ghisa viti secondarie
    Screws (special applications) Viti (applicazioni speciali) Core hardened steel screws, surface treated screws Viti in acciaio temprato, viti trattate superficialmente
    Environment temperature Temperatura ambiente From -50° up to +60°C Da -50° a +60°C
    Hydraulic Temperature Temperature olio From -50°C up to +300°C Da -50°C a +300°C
  • Applications


    Oil & Gas


    Power Generation

    Tool Machines






    High Viscosity

    Low Viscosity

    Dirty Fluids

    Fuel Oils

    No Noise


    no content available
    Please insert your email address to download pdf.

The materials on this website are, in whole or in part, protected and are proprietary of Settima Meccanica S.r.l. based in via E. Berlinguer 20, 29020 Settima (PC) including, as non-exhaustive examples, the brand names, trademarks, domain names, designs and patterns, patents and copyrights,. All rights therein are internationally reserved.

All brand names, trade names, logos, designs and other distinctive marks reproduced in this website, even if not registered, are trademarks of Settima Meccanica S.r.l. All domain names used in this website and / or in the websites connected to this one, belong to, or are authorized by, Settima Meccanica, which owns their whole management at international level.